微機控制電子萬能試驗機，為剖析檢測儀器，歸屬于機器設備零配件一種，它主要用于對各種各樣非金屬材料及高分子材料開展基本物理性能指標值的檢測。相關工作人員進行安裝的自動控制系統和數據管理系統，保持了系統軟件的全智能化調節。試驗過程中數據的采集、過程的控制和試驗數據的后處理工作全部由計算機來完成。本機器設備可以全自動求得抗壓強度、抗張強度、撕破抗壓強度等。該機器設備適用防水材料、金屬材料線絲、紡織品、硫化橡膠、瓷器、包裝制造行業、塑料薄膜、紙型、塑膠制品等加工業及其各個產品品質監管單位，另外還適用大中專院校開展課堂教學演示工作。

Microcomputer controlled electronic universal testing machine is a kind of machine equipment parts for analyzing and testing instruments. It is mainly used for testing the basic physical performance index values of various non-metallic materials and polymer materials. The automatic control system and data management system installed by relevant staff maintain the full intelligent adjustment of system software. The data acquisition, process control and post-processing of test data are all completed by computer. The machine can automatically obtain compressive strength, tensile strength, tear compressive strength, etc. The machine is suitable for the processing industries and the quality supervision units of waterproof materials, metal wires, textiles, vulcanized rubber, porcelain, packaging and manufacturing industries, plastic films, paper forms, plastic products, etc. in addition, it is also suitable for the classroom teaching demonstration work in Colleges and universities.

其操作流程如下：

The operation process is as follows:

1、啟動檢驗，設備運行是不是一切正常。 2、依據檢驗規定拆換適合工裝夾具。 3、實驗前，調節好限位開關檔塊。 4、打開服務器上電源總開關，打開計算機測試工具。5、設定主要參數，點擊軟件起動按鍵，起動服務器剛開始實驗。 6、實驗完畢，查驗機器設備運行是不是一切正常，撤出程序流程，關掉電子計算機。

1. Start up and check whether the equipment operates normally. 2. According to the inspection regulations, remove and replace the suitable fixture. 3. Before the experiment, adjust the limit switch block. 4. Turn on the main power switch on the server and turn on the computer test tool. 5. Set the main parameters, click the software start button, and start the server just to start the experiment. 6. After the experiment, check whether the operation of the machine and equipment is normal, withdraw the program flow and turn off the electronic computer.